ASTM A276/ A479 UNS S31803 Duplex Stainless Steel Round Bar Manufacturer, Supplier, Stockist & Exporter from India
Enquire NowDuplex Steel S31803 Round Bar, Duplex Steel S31803 Round Bars Supplier, Duplex Steel S31803 Round Bars Exporter, Duplex S31803 Propellor Shafts Stockist In India, Duplex Steel Uns S31803 Bar, Astm A276 Duplex Steel S31803 Round Bars, Duplex Steel S31803 Bars Largest Stockist In India, Duplex Stainless Steel S31803 Rods Suppliers & Dealer In Mumbai, India.
Buy Duplex Steel S31803 Bright Bar, 2205 Duplex Steel Round Bar, S31803 Duplex Steel Flat Bars, Duplex Steel DIN 1.4462 Polish Bar Stock, ASME SA479 Duplex S31803 Forged Bar Exporter, S31803 Duplex Threaded Bar, Duplex S31803 Cold Finish Round Bar Dealer, Duplex Stainless Steel S31803 Round Bar Manufacturer in India.
DETAILED INFORMATION
ASTM A276 Uns S31803 Duplex Round Bar, furnished under condition A, will undergo annealing. The A276 S31803 Hex Bar is first hardened, then tempered at a relative temperature. The ASTM A276 specifies that bars produced under Condition T must be hardened and tempered at a significantly higher temperature. Cold work is required for both conditions S & B.
As a result of Condition S, ASTM A276 F51 Bar could either be strain hardened or relatively light cold worked. As opposed to Condition B, where ASTM A276 Uns S31803 Bar is cold worked at severe temperatures. Both ASTM A276 and ASTM A479 specifications require tests to determine properties like tensile and yield strength, elongation, and hardness of the A479 Grade S31803 Rod.
Triroundbars.com offers a wide range of ASTM A479 UNS S31803 Duplex Round Bars, which have outstanding features such as corrosion resistance, high tensile strength, and wear resistance. A ferritic and austenitic stainless steel, Duplex Steel S31803 Round Bars have increased corrosion resistance and potency.
Compared to other stainless steel grades, these Duplex Steel S32205 Round Bars provide superior resistance to SCC, pitting, high strength, and crevice corrosion. The Duplex Steel S31803 Square Bars are nitrogen improved steel that is designed to combat corrosion issues associated with the 300 series stainless steel.
As well as the Duplex Steel S32205 Flat Bars, we also offer Duplex Steel S31803 Threaded Bars in many sizes and shapes. These stainless steel bars are ferritic, two-phase, austenitic, and contain 3 percent molybdenum, 22 percent chromium, and 6 percent nickel alloys.
These Duplex Steel S32205 Hollow Bars may significantly reduce the effective fatigue strength of steel due to their corrosive environment. Duplex Steel S31803 Hexagonal Bars should be heated uniformly and worked in a range of 1750°F to 2250°F. Duplex Steel S32205 Triangular Bars is quite soft at these temperatures and is readily formed, but above this range, it is subject to hot tearing.
The UNS S31803 round bar, which is equivalent to Werstoff No 1.4462, is made from duplex stainless steel, which is composed of austenite and ferrite in equal proportions. The melting point ranges between 1420 – 1465 degrees Celsius and it has a moderate density of 7.805 g/cm3. As their tensile strength is 621 MPa and density is 7.82 g/cm3, Duplex Steel UNS S31803 Bars are known for their strength and toughness. Shapes of the bars are changed based on industry requirements, such as ASTM A479 UNS S31803 hex bars.
They are hexagonal in shape and are heated uniformly between 1750 and 2250 Fahrenheit. F51 round bars are made of duplex stainless steel and have an ISO tolerance between h8 and h11. It cannot be hardened by heat, but it can be strengthened by cold working.
This ASTM A276 F51 Duplex Round Bar is made of 21% chrome and 4.5% nickel and is an ISO 9001:2008 certified product with a tensile strength of 105 N/mm2 and a hardness of 170-255 Brinell. Typical UNS s31803 f51 rods provide high performance under high temperatures of 300-degree Celsius, and can work between 1020-1100 Celsius. It is designed to take the stress of up to 23.1 ksi at 600 Fahrenheit.
Steel grade S31803 bars have high iron content between 63-70% and the rest is Chromium, Nickel, and Molybdenum. Due to this, it has high resistance to corrosion and against chloride-rich solutions, thus they are used in chemical industries, water desalination plants.
CITIES WE DELIVER
Adoni, Amaravati, Anantapur, Chandragiri, Chittoor, Dowlaiswaram ,Eluru, Guntur, Kadapa, Kakinada, Kurnool, Machilipatnam, Nagarjunakoṇḍa, Rajahmundry, Srikakulam, Tirupati, Vijayawada, Visakhapatnam, Vizianagaram, Yemmiganur, Itanagar, Dhuburi, Dibrugarh, Dispur, Guwahati, Jorhat, Nagaon, Sivasagar, Silchar, Tezpur, Tinsukia, Ara, Barauni, Begusarai, Bettiah, Bhagalpur, Bihar, Sharif, Bodh Gaya, Buxar, Chapra, Darbhanga, Dehri, Dinapur Nizamat, Gaya, Hajipur, Jamalpur, Katihar, Madhubani, Motihari, Munger, Muzaffarpur, Patna, Purnia, Pusa, Saharsa, Samastipur, Sasaram, Sitamarhi, Siwan, Chandigarh, Ambikapur, Bhilai, Bilaspur, Dhamtari, Durg, Jagdalpur, Raipur, Rajnandgaon, Daman, Diu, Silvassa, Delhi, New Delhi, Madgaon, Panaji, Ahmadabad, Amreli, Bharuch, Bhavnagar, Bhuj, Dwarka, Gandhinagar, Godhra, Jamnagar, Junagadh, Kandla, Khambhat, Kheda, Mahesana, Morbi, Nadiad, Navsari, Okha, Palanpur, Patan, Porbandar, Rajkot, Surat, Surendranagar, Valsad, Veraval, Ambala, Bhiwani, Chandigarh, Faridabad, Firozpur Jhirka, Gurugram, Hansi, Hisar, Jind, Kaithal, Karnal, Kurukshetra, Panipat, Pehowa, Rewari, Rohtak, Sirsa, Sonipat, Bilaspur, Chamba, Dalhousie, Dharmshala, Hamirpur, Kangra, Kullu, Mandi, Nahan, Shimla, Una, Anantnag, Baramula, Doda, Gulmarg, Jammu, Kathua, Punch, Rajouri, Srinagar, Udhampur, Bokaro, Chaibasa, Deoghar, Dhanbad, Dumka, Giridih, Hazaribag, Jamshedpur, Jharia, Rajmahal, Ranchi, Saraikela, Badami, Ballari, Bengaluru, Belagavi, Bhadravati, Bidar, Chikkamagaluru, Chitradurga, Davangere, Halebid, Hassan, Hubballi-Dharwad, Kalaburagi, Kolar, Madikeri, Mandya, Mangaluru, Mysuru, Raichur, Shivamogga, Shravanabelagola, Shrirangapattana, Tumakuru, Vijayapura, Alappuzha, Vatakara, Idukki, Kannur, Kochi, Kollam, Kottayam, Kozhikode, Mattancheri, Palakkad, Thalassery, Thiruvananthapuram, Thrissur, Kargil, Leh, Balaghat, Barwani, Betul, Bharhut, Bhind, Bhojpur, Bhopal, Burhanpur, Chhatarpur, Chhindwara, Damoh, Datia, Dewas, Dhar, Dr. Ambedkar Nagar (Mhow), Guna, Gwalior, Hoshangabad, Indore, Itarsi, Jabalpur, Jhabua, Khajuraho, Khandwa, Khargone, Maheshwar, Mandla, Mandsaur, Morena, Murwara, Narsimhapur, Narsinghgarh, Narwar, Neemuch, Nowgong, Orchha, Panna, Raisen, Rajgarh, Ratlam, Rewa, Sagar, Sarangpur, Satna, Sehore, Seoni, Shahdol, Shajapur, Sheopur, Shivpuri, Ujjain, Vidisha, Ahmadnagar, Akola, Amravati, Aurangabad, Bhandara, Bhusawal, Bid, Buldhana, Chandrapur, Daulatabad, Dhule, Jalgaon, Kalyan, Karli, Kolhapur, Mahabaleshwar, Malegaon, Matheran, Mumbai, Nagpur, Nanded, Nashik, Osmanabad, Pandharpur, Parbhani, Pune, Ratnagiri, Sangli, Satara, Sevagram, Solapur, Thane, Ulhasnagar,n Vasai-Virar, Wardha, Yavatmal, Imphal, Cherrapunji, Shillong, Aizawl, Lunglei, Kohima, Mon, Phek, Wokha, Zunheboto, Balangir, Baleshwar, Baripada, Bhubaneshwar, Brahmapur, Cuttack, Dhenkanal, Kendujhar, Konark, Koraput, Paradip, Phulabani, Puri, Sambalpur, Udayagiri, Karaikal, Mahe, Puducherry, Yanam, Amritsar, Batala, Chandigarh, Faridkot, Firozpur, Gurdaspur, Hoshiarpur, Jalandhar, Kapurthala, Ludhiana, Nabha, Patiala, Rupnagar, Sangrur, Abu, Ajmer, Alwar, Amer, Barmer, Beawar, Bharatpur, Bhilwara, Bikaner, Bundi, Chittaurgarh, Churu, Dhaulpur, Dungarpur, Ganganagar, Hanumangarh, Jaipur, Jaisalmer, Jalor, Jhalawar, Jhunjhunu, Jodhpur, Kishangarh, Kota, Merta, Nagaur, Nathdwara, Pali, Phalodi, Pushkar, Sawai Madhopur, Shahpura, Sikar, Sirohi, Tonk, Udaipur, Gangtok, Gyalshing, Lachung, Mangan, Arcot, Chengalpattu, Chennai, Chidambaram, Coimbatore, Cuddalore, Dharmapuri, Dindigul, Erode, Kanchipuram, Kanniyakumari, Kodaikanal, Kumbakonam, Madurai, Mamallapuram, Nagappattinam, Nagercoil, Palayamkottai, Pudukkottai, Rajapalayam, Ramanathapuram, Salem, Thanjavur, Tiruchchirappalli, Tirunelveli, Tiruppur, Thoothukudi, Udhagamandalam, Vellore, Hyderabad, Karimnagar, Khammam, Mahbubnagar, Nizamabad, Sangareddi, Warangal, Agartala, Agra, Aligarh, Amroha, Ayodhya, Azamgarh, Bahraich, Ballia, Banda, Bara Banki, Bareilly, Basti, Bijnor, Bithur, Budaun, Bulandshahr, Deoria, Etah, Etawah, Faizabad, Farrukhabad-cum-Fatehgarh, Fatehpur, Fatehpur Sikri, Ghaziabad, Ghazipur, Gonda, Gorakhpur, Hamirpur, Hardoi, Hathras, Jalaun, Jaunpur, Jhansi, Kannauj, Kanpur, Lakhimpur, Lalitpur, Lucknow, Mainpuri, Mathura, Meerut, Mirzapur-Vindhyachal, Moradabad, Muzaffarnagar, Partapgarh, Pilibhit, Prayagraj, Rae Bareli, Rampur, Saharanpur, Sambhal, Shahjahanpur, Sitapur, Sultanpur, Tehri, Varanasi, Almora, Dehra Dun, Haridwar, Mussoorie, Nainital, Pithoragarh, Alipore, Alipur Duar, Asansol, Baharampur, Bally, Balurghat, Bankura, Baranagar, Barasat, Barrackpore, Basirhat, Bhatpara, Bishnupur, Budge Budge, Burdwan, Chandernagore, Darjeeling, Diamond Harbour, Dum Dum, Durgapur, Halisahar, Haora, Hugli, Ingraj Bazar, Jalpaiguri, Kalimpong, Kamarhati, Kanchrapara, Kharagpur, Cooch Behar, Kolkata, Krishnanagar, Malda, Midnapore, Murshidabad, Nabadwip, Palashi, Panihati, Purulia, Raiganj, Santipur, Shantiniketan, Shrirampur, Siliguri, Siuri, Tamluk, Titagarh
COUNTRIES WE DELIVER
Afghanistan, Albania, Algeria, Andorra, Angola, Antigua-Barbuda Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia-Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina-Faso, Burundi, Côte d’Ivoire, Cabo Verde, Cambodia, Cameroon, Canada, Central African Republic, Chad, Chile, China, Colombia, Comoros, Congo (Congo-Brazzaville), Costa-Rica, Croatia, Cuba, Cyprus, Czechia (Czech Republic), Democratic Republic of the Congo, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Eswatini (fmr. “Swaziland”), Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Holy See, Honduras, Hungary, Iceland, India, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Myanmar (formerly Burma), Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, North Korea, North Macedonia, Norway, Oman, Pakistan, Palau, Palestine-State, Panama, Papua, New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Rwanda, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Sweden, Switzerland, Syria, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, United Arab Emirates, United Kingdom, United States of America, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zambia, Zimbabwe.
ASTM A276/ A479 UNS S31803 Duplex Stainless Steel Round Bar Specification List
Specification |
ASTM A276, A479 / ASME SA276, SA479 |
Standard |
EN, DIN, JIS, BS, AISI, API, ASTM, ASME Round Bars |
ASTM A276 UNS S31803 Round bars size |
Diameter: 3 MM – 450 MM |
ASTM A276 UNS S31803 Duplex Angle bar size |
3 MM * 20 MM * 20 MM ~ 12 MM * 100 MM * 100 MM |
Length |
3 to 6 metre, Custom Cut Lengths |
ASTM A276 UNS S31803 Square bar size |
4 MM *4 MM ~ 100MM * 100 MM |
ASTM A276 UNS S31803 Flat bar size |
Thickness: 2MM ~ 100 MM |
Width: 10 MM To 500 MM |
|
ASTM A276 UNS S31803 Duplex Hex Bar size |
2 MM To 100 MM |
ASTM A276 UNS S31803 Rectangles Size |
33 mm * 30 mm To 295 mm * 1066 mm |
ASTM A276 F51 Bar Finish |
Bright Polished, Black, Polish, Rough Turned, Grinding, Centreless Ground, NO.4 Finish, Matt Finish & BA Finish Supplier and manufacturer |
ASTM A276 F51 Bar Tolerance |
K9, K10, K11, K12, H8, H9, H10, H11, H12, H13 or as per client’s requirements |
ASTM A276 UNS S31803 Billet Size |
1/2 inch to 495 MM |
UNS S31803 F51 Round Bar Condition |
UNS S31803 F51 Cold Drawn Published Cold Drawn Centreless Ground and Polished, Annealed round bar, Sheared and Edged, Rolled Flat |
UNS S31803 F51 Round Bar Technique |
ASTM A276 UNS S31803 Hot Rolled, UNS S31803 F51 Cold Rolled, Cold Drawn, Forged Round Bar, UNS S31803 F51 Rod |
ASTM A276 F51 available forms |
ASTM A276 F51 Round, Half Round, Rod, Threaded, Precision Ground Bar, Square, Hollow, Hex (A/F), Triangle, Rectangle, T-Bar, Half Round Bar, Flat Bar, Rings, Blocks, Billet, Ingot, I/H Bar, Angle, Channel Bar, Profiles, Round Rod, Forging Supplier and Manufacturer |
UNS S31803 F51 Round Bar Tolerances |
According to En 10278 – Iso 286-2 |
Certificates |
UNS S31803 F51 Round Bar are as per EN 10204 / 3.1 |
Distributor and Suppliers Located in Following locations |
Kanpur, Tehran, Jamshedpur, Mumbai, Indore, Port of Spain, Calgary, India, Dammam, Khobar, Ludhiana, Howrah, Caracas, Bangalore, Montreal, Perth, Vadodara, Gurgaon, Muscat, Bogota, London, Gimhae si, Bengaluru, Surat, Tau, Melbourne, Kolkata, Courbevoie, Ranchi, Coimbatore, Rajkot, Ahvaz, Noida, Sydney, Gujarat, Manama, Pimpri Chinchwad, Ahmedabad, Abu Dhabi, Janeiro, Thiruvananthapuram, New Delhi, Ernakulam, Santiago, Karachi, Riyadh, Hyderabad, Mexico, Ankara, Kuwait, Ludhiana, Lagos, Chennai, Baroda, Istanbul, Nagpur |
ASTM A276/ A479 UNS S31803 Duplex Stainless Steel Round Bar Composition Standard
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
S31803 | 0.030 max | 2.00 max | 1.00 max | 0.030 max | 0.020 max | 22.0 – 23.0 | 3.0 – 3.5 | 4.50 – 6.50 | 0.14 – 0.20 | 63.72 min |
S32205 | 0.030 max | 2.00 max | 1.00 max | 0.030 max | 0.020 max | 21.0 – 23.0 | 2.50 – 3.50 | 4.50 – 6.50 | 0.8 – 0.20 | 63.54 min |
ASTM A276/ A479 UNS S31803 Duplex Stainless Steel Round Bar Mechanical Properties
Tensile Strength | Melting Point | Yield Strength (0.2%Offset) | Density | Elongation |
Psi – 90000 , MPa – 620 | 1440 °C (2625 °F) | Psi – 65000 , MPa – 450 | 7.8 g/cm3 | 30 % |
ASTM A276/ A479 UNS S31803 Duplex Stainless Steel Round Bar Finishes
Cold drawn |
CD |
Polished |
P |
Bright drawn |
BD |
Slit rolled edge |
SRE |
Centreless ground |
CG |
Hot finished |
HF |
Cold finished |
CF |
Hot rolled annealed and pickled |
HRAP |
Peeled and turned |
P And T |
Rough turned/peeled |
RT |
Smooth turned |
ST |
Peeled and reeled |
PR |
ASTM A276/ A479 UNS S31803 Duplex Stainless Steel Round Bar Condition
Hardened and tempered |
H And T |
Annealed |
ANN |
Precipitation hardened |
PH |
ASTM A276/ A479 UNS S31803 Duplex Stainless Steel Round Bar Equivalent Grade
STANDARD |
WERKSTOFF NR. |
UNS |
Duplex S31803 |
1.4462 |
S31803 |
ASTM A276/ A479 UNS S31803 Duplex Stainless Steel Round Bar Weight Chart
UNS S31803 Round Bar |
||||||||
Size In Millimetre |
Kilogram And Foot |
Kilogram And Mtr |
Size |
Kilogram And Foot |
Kilogram And Mtr |
Size |
Kilogram And Foot |
Kilogram And Mtr |
3 millimetre |
0.017 |
0.055 |
20millimeter |
0.753 |
2.470 |
3″ |
10.900 |
35.762 |
1/8″ |
0.019 |
0.062 |
22 millimetre |
0.908 |
2.979 |
3-1/4″ |
12.800 |
41.996 |
5/32″ |
0.029 |
0.095 |
7/8″ |
0.926 |
3.038 |
3-1/2″ |
14.850 |
48.772 |
4 millimetre |
0.030 |
0.098 |
24 millimetre |
1.080 |
3.543 |
3-3/4″ |
17.001 |
55.780 |
3/16″ |
0.043 |
0.141 |
25 millimetre |
1.180 |
3.871 |
4″ |
19.306 |
63.340 |
5 millimetre |
0.047 |
0.154 |
1″ |
1.210 |
3.970 |
4-1/4″ |
21.908 |
72.249 |
7/32″ |
0.058 |
0.190 |
26 millimetre |
1.271 |
4.170 |
4-1/2″ |
24.4487 |
80.340 |
6millimeter |
0.068 |
0.223 |
27 millimetre |
1.368 |
4.490 |
4-3/4″ |
27.366 |
90.249 |
1/4″ |
0.076 |
0.249 |
1-1/8″ |
1.534 |
5.033 |
5″ |
30.461 |
99.940 |
7 millimetre |
0.091 |
0.298 |
30 millimetre |
1.691 |
5.548 |
5-1/2″ |
36.690 |
121.000 |
5/16″ |
0.118 |
0.387 |
1-1/4″ |
1.924 |
6.349 |
6″ |
43.860 |
143.900 |
8 millimetre |
0.120 |
0.398 |
32millimeter |
1.894 |
6.314 |
6-1/2″ |
51.093 |
167.630 |
9 millimetre |
0.152 |
0.498 |
1-3/8″ |
2.303 |
7.550 |
7″ |
59.432 |
196.000 |
3/8″ |
0.170 |
0.557 |
35 millimetre |
2.390 |
7.553 |
7-1/2″ |
68.226 |
225.000 |
10 millimetre |
0.189 |
0.620 |
36 millimetre |
2.438 |
7.999 |
8″ |
77.586 |
254.55 |
11 millimetre |
0.228 |
0.748 |
38 millimetre |
2.792 |
8.903 |
10″ |
121.048 |
397.140 |
7/16″ |
0.232 |
0.761 |
1-1/2″ |
2.715 |
8.951 |
|||
12 millimetre |
0.271 |
0.889 |
40 millimetre |
3.009 |
9.872 |
|||
1/2″ |
0.303 |
0.994 |
1-5/8″ |
3.200 |
10.449 |
|||
13 millimetre |
0.318 |
1.043 |
1-3/4″ |
3.712 |
12.179 |
|||
14 millimeter |
0.368 |
1.207 |
45 millimeter |
3.807 |
12.555 |
|||
9/16″ |
0.383 |
1.256 |
1-7/8″ |
4.260 |
13.977 |
|||
15millimeter |
0.424 |
1.391 |
48millimeter |
4.330 |
14.205 |
|||
5/8″ |
0.473 |
1.551 |
50millimeter |
4.698 |
15.414 |
|||
16 millimeter |
0.481 |
1.578 |
2″ |
4.848 |
15.906 |
|||
17millimeter |
0.543 |
1.791 |
2-1/8″ |
5.475 |
17.963 |
|||
11/16″ |
0.573 |
1.880 |
2-1/4″ |
6.135 |
20.128 |
|||
18 millimeter |
0.610 |
2.001 |
60millimeter |
6.768 |
22.205 |
|||
3/4″ |
0.682 |
2.237 |
2-3/8″ |
6.838 |
22.435 |
|||
2-1/2″ |
7.576 |
24.856 |
||||||
2-5/8″ |
8.354 |
27.409 |
||||||
2-3/4″ |
9.169 |
30.083 |
ASTM A276/ A479 UNS S31803 Duplex Stainless Steel Round Bar Dimensional Tolerance
Round Bar Tolerances | ||
Shape And Section | Diameter And Size & width Across Flat | Permitted variation |
millimetre | millimetre | |
Round | ≥6 ≦ 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 100 | + 0 to – 0.070, + 0 to – 0.085, + 0 to – 0.100, + 0 to – 0.120, + 0 to – 0.140 |
Flats (thick.) | < 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80 | + 0 to – 0.110, + 0 to – 0.130, + 0 to – 0.250, + 0 to – 0.350 |
Flats Bars (width Of Bars) | < 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 100, > 100 ≦ 130, > 130 ≦ 160, > 160 ≦ 320 | + 0 to – 0.110, + 0 to – 0.130, + 0 to – 0.160, + 0 to – 0.190, + 0 to – 0.220, + 0 to – 0.350, + 0 to – 1.00, + 1.00 to – 1.00 |
Square Bars and hexagon Bars | ≥ 6 ≦ 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 105 | + 0 to – 0.090, + 0 to – 0.110, + 0 to – 0.130, + 0 to – 0.160, + 0 to – 0.250 |
ASTM A276/ A479 UNS S31803 Duplex Stainless Steel Round Bar Physical Properties
Grade |
Density (kg/m3) |
Elastic Modulus (GPa) |
Mean Coeff of Thermal Expansion (µm/m/°C) |
Thermal Conductivity (W/m.K) |
Specific Heat 0-100°C ( J/kg.K) |
Electrical Resistivity (nO.m) |
|||
0- 100°C |
0- 315°C |
0- 538°C |
at 100°C |
at 500°C |
|||||
2205 |
782 |
190 |
13.7 |
14.2 |
– |
19 |
– |
418 |
850 |
ASTM A276/ A479 UNS S31803 Duplex Stainless Steel Round Bar Composition Standard
Grade |
C |
Mn |
Si |
P |
S |
Cr |
Mo |
Ni |
N |
Fe |
S31803 |
0.030 max |
2.00 max |
1.00 max |
0.030 max |
0.020 max |
22.0 – 23.0 |
3.0 – 3.5 |
4.50 – 6.50 |
0.14 – 0.20 |
63.72 min |
S32205 |
0.030 max |
2.00 max |
1.00 max |
0.030 max |
0.020 max |
21.0 – 23.0 |
2.50 – 3.50 |
4.50 – 6.50 |
0.8 – 0.20 |
63.54 min |
ASTM A276 Duplex Steel F51 Rod Bar Dimensions Chart
UNS S31803 Round Bar Dimensions |
|||||||
Size Of Metric |
US Bar Standard |
Canadian Standard |
Japanese Standard |
||||
Size Of Bar |
Diameter In (millimetre) |
Bars Size |
Diameter In (Inches) |
Bars Size |
Diameter In (millimeter2) |
Bars Size |
Diameter In (millimetre) |
5 |
5 |
#2 |
0.250 |
10M |
100 |
6 |
6 |
5.5 |
5.5 |
#3 |
0.375 |
15M |
200 |
10 |
10 |
6 |
6 |
#4 |
0.500 |
20M |
300 |
13 |
13 |
7 |
7 |
#5 |
0.600 |
25M |
500 |
16 |
16 |
8 |
8 |
#6 |
0.750 |
30M |
700 |
19 |
19 |
9 |
9 |
#7 |
0.875 |
35M |
1000 |
22 |
22 |
10 |
10 |
#8 |
1.000 |
45M |
1500 |
25 |
25 |
11 |
11 |
#9 |
1.125 |
55M |
2500 |
29 |
29 |
12 |
12 |
#10 |
1.250 |
32 |
32 |
||
14 |
14 |
#11 |
1.375 |
35 |
35 |
||
16 |
16 |
#12 |
1.500 |
38 |
38 |
||
18 |
18 |
#13 |
1.600 |
41 |
41 |
||
20 |
20 |
#14 |
1.750 |
44 |
44 |
||
22 |
22 |
#15 |
1.875 |
48 |
48 |
||
25 |
25 |
#16 |
2.000 |
51 |
51 |
||
28 |
28 |
#18 |
2.250 |
57 |
57 |
||
32 |
32 |
||||||
36 |
36 |
||||||
40 |
40 |
||||||
44 |
44 |
||||||
50 |
50 |
ASTM A276 Type 2205 Round Bar HS Code
HS Code |
Description |
72221119 |
SS DUPLEX ROUND BAR (HOT WORKED STAINLESS BAR STEEL ROLLED),MBR-SANMAC2205-35 FL-1-1700 |
72221119 |
SS DUPLEX ROUND BAR (HOT WORKED STAINLESS BAR STEEL ROLLED),MBR-SANMAC2205-40 FL-1-1250 |
72221119 |
DUPLEX ROUND BAR (HOT WORKED STAINLESS BAR STEEL ROLLED),MBR-SANMAC2205-20 FL-2-2200 |
72221119 |
DUPLEX ROUND BAR (HOT WORKED STAINLESS BAR STEEL ROLLED),MBR-SANMAC2205-50 FL-1-1600 |
72221119 |
DUPLEX ROUND BAR (HOT WORKED STAINLESS BAR STEEL ROLLED),MBR-SANMAC2205-40 FL-2-1650 |
72221119 |
DUPLEX ROUND BAR (HOT WORKED STAINLESS BAR STEEL ROLLED),MBR-SANMAC2205-35 FL-1-1500 |
72221119 |
DUPLEX ROUND BAR (HOT WORKED STAINLESS BAR STEEL ROLLED),MBR-SANMAC2205-60 FL-1-0500 |
72222019 |
BAR STEEL STAINLESS SPECIFICATION – MBR-SANMAC 2205-90 HEAT NO- 545377 (SS DUPLEX ROUND BARS)) |
72223099 |
STAINLESS STEEL ROUND BARS DUPLEX GRADE 2205 EX-STOCK |
72221199 |
SS DUPLEX ROUND BARS – MBR-SANMAC2205-125, FL-1-2000 |
72221119 |
SS DUPLEX ROUND BARS (HOT WORKED STAINLESS BAR STEEL ROLLED) MBR-SANMAC 2205 -75 FL-1-2000- |
Duplex 2205 Cold Forming
Duplex 2205 has demonstrated good formability in a variety of fabrications. Duplex 2205’s high strength can cause problems. The grade’s high strength causes higher spring-back even when the equipment has sufficient power.
Duplex 2205 Hot Forming
Duplex 2205 can be worked at maximum temperatures between 2010 and 2100°F (1100 to 1150°C). When a workpiece does not have a compact shape, the edges may be significantly cooler than the bulk, which can lead to cracking.
Duplex 2205 Machining
Duplex 2205 is somewhat more difficult to machine than austenitic stainless steels from the 300 series. Cutting forces are higher and tool wear is more rapid.
Duplex 2205 Welding
Despite good weldability, 2205 Duplex should not be welded without filler metal due to excessive ferrite formation.
Duplex 2205 Heat Treatment
The annealing temperature ranges from 1868 to 2012°F (1020 to 1100°C). Heat treatment cannot harden Duplex 2205, but it does work-harden. In order to avoid warping and distortion, it is necessary to compensate for a higher coefficient of thermal expansion.
Price Of Duplex 2205 Round Bar In India
Description |
Price list of Duplex 2205 Round bar in India |
Duplex Stainless Steel 2205 Round Bar Best Price |
US $ 1500 / Ton |
Cold Drawn High Precision AISI Duplex 2205 Stainless Steel Bright Round Bar |
US $ 800-1000 / Ton |
Duplex 2205 Stainless Steel Round /Rod Bar |
US $ 590-680 / Ton |
Duplex 2205 Steel Ground Round Bar |
US $ 99-189 / Piece |
Cold Rolled/Drawn 2205 Duplex Stainless Steel Round Bar |
US $ 2.5-10 / kg |
High-Quality Duplex Grade 2205 Stainless Steel Round Bar |
US $ 1200-2500 / Ton |
Duplex 2205 1.4410 Stainless Steel Round Bar |
US $ 2500-12000 / Ton |
Anti Corrosion 2205 Duplex Stainless Steel Round Bar for Chemical Industry |
US $ 899-3000 / Ton |
1.4462 Duplex 2205 Round Bar Length
- USA : 40 feet
- Metric system: standard length is 9 – 12 metres
Applications Industry
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
Our tests (both destructive and non-destructive)
- Positive material recognition
- Mechanical examining like tensile, Elongation and reduction of area.
- Large-scale test
- Chemical examination-Spectro analysis
- Firmness test
- Pitting protection test
- Small tests
- X-ray test
- Impact analysis
- Eddy current examining
- Hydrostatic analysis
- Prompt test
Packing
- International shipments, in which consignments pass through several channels before arriving at their final destination, require special attention to packaging.
- Our goods are packed in a variety of ways depending on the product. Our products are packed in a variety of ways, including:
- Shrink-wrapped
- Carton boxes
- Wooden pallets
- Wooden boxes
- Wooden crates